Home > Products > EOD - IEDD >
QMod™ Water Disruptor
Home > Products > EOD - IEDD >
QMod™ Water Disruptor
QMod™ is a medium-weight, explosively driven water disruptor designed to defeat medium-sized IEDs in heavy casings, fire extinguishers, gas cylinders, steel barrels, and vehicle doors. Based on the same geometry as the MLVD™ at a quarter of the length, its blunt blade-jet is optimised to crush and deform thick-walled targets rather than pierce them - the geometry that defeats a fire extinguisher or gas cylinder where a narrow point-focal jet cannot. At 1.9kg filled and a maximum NEQ of 95g, it deploys by hand or ROV. For larger vehicle-borne IED defeat, see MLVD™. For a more penetrating projectile at a similar weight, see DemiMod™ and MiniMod™. For remote deployment, see Project REDS. Covered in our EOD, IEDD & Maritime EOD training.
Blunt blade-jet for heavy-casing defeat. Crushes and deforms fire extinguishers, gas cylinders, steel barrels, and drums rather than relying on piercing depth
Penetrates car doors for direct attack against IEDs inside vehicles without requiring boot or roof access
Removes concrete cladding from roadside IEDs consisting of projectiles cast in concrete, at stand-off
Irritant injection. Placed against a stud wall, QMod creates a gun port and simultaneously injects 0.6 litres of CS or pepper, immediately incapacitating room occupants
Scalable in arrays side-by-side or end-to-end, adjusted to the target size
1.9kg filled, no metal components; water tamping suppresses flash and reduces shockwave
Explosive Load and Performance
QMod™ uses sheet explosive or detonating cord as the propellant and water as the projectile. Each charge comprises two containers: a tamper and a projectile, which fit together to sandwich the explosive charge. End caps urge the two containers together. These end caps feature grooves to allow multiple charges to be joined side-by-side or end-to-end, allowing the size to be adjusted according to the target.
QMod™ produces a short blade-like jet of water. Though less penetrating than an equivalent point-focal jet, this shape increases the ability to penetrate heavy cases and destroy the initiation system of the target.
Deployment to Target
Deployable by hand or by ROV, a single module is suitable for disrupting wooden and metal boxes up to the size of a 40-gallon drum. QMod™ is effective at removing the concrete cladding from suspected roadside IEDs, consisting of projectiles cast in concrete, at a stand-off. It is also capable of disrupting IEDs in steel fire extinguishers or barrels and penetrating a vehicle door to attack an IED within.
You can also use QMod™ in breaching to inject irritants such as CS or pepper. A charge, placed against a stud wall, creates a gun port while simultaneously injecting 0.6 litres of liquid containing irritant, immediately incapacitating occupants of the room.
Safety
The charges have been constructed with no metal components, ensuring minimal projection of dangerous fragments. Water surrounds the explosive, tamping and imparting a higher proportion of the explosive energy to the jet. The water tamping also suppresses the flash of the explosive and reduces the shockwave generated by the charge, making it much safer than the uncontrolled recoil of heavy disruptors.
Specifications
| Dimensions | 160 x 135 x 100 mm |
| Weight when empty | 0.3kg |
| Weight when filled | 1.9kg |
| Total water capacity | 1.6 litres |
| Volume of projected water | 0.6 litres |
"*" indicates required fields









